Announcement

Collapse
No announcement yet.

Flywheel removal tool

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bertam
    replied
    The pistons are frozen in the bores so I don't think crankshaft rotation will be much of an issue there.

    Leave a comment:


  • minied
    replied
    You'll need the gizmo that bolts to the flywheel housing and meshes with the flywheel ring gear. No way the crankshaft can rotate then. There should be one of these in the tool library.

    Leave a comment:


  • Bertam
    started a topic Flywheel removal tool

    Flywheel removal tool

    Does the club tool library include a flywheel removal tool?

    Also, is there a specific method for removing the crankshaft pulley and bolt - the ones I am trying to remove (on a long-dead engine that has been sitting for many years) seem to be stuck solid? I'm afraid I'll damage the nose end of the crank if I 'whoop on it'.

    Andrew
Working...
X